Does your car overheat now and then despite your regular maintenance? If so, chances are you have a faulty thermostat.
The job of a thermostat is to regulate the temperature of the engine by allowing only the right amount of coolant through circulation. Once something goes wrong, you can expect various oddities like your engine overheating and more.
For a quick fix, you can change the thermostat. But there are cases when changing the thermostat isn’t enough. In situations like these, you need to flush your coolant system.
But what if you have never done it? Here is everything you need to know.
Why Flush Your Coolant System?
Most car systems are closed, meaning that the coolant only flows one way. As it travels, it picks up heat from the engine and transfers it to the air surrounding the engine. When the coolant level gets low, air can enter the system and cause corrosion.
To keep your car running smoothly, replace the radiator coolant with fresh coolant at least once every two years.
What Does This Process Do?
It’s important to flush your car’s coolant system because it helps to remove any debris or deposits that may have built up over time. Doing this will help to keep your engine running cooler and more. How often you need to flush your system will depend on how often you drive and how hard you drive your car.
Pros and Cons of Flushing Your Coolant System
Flushing your coolant can help to prevent rust and corrosion from building up in the system. It can help to improve the efficiency of the system, and it can help to extend the life of the system as well.
However, flushing your system can be a messy process, so be prepared to get your hands dirty. Second, you’ll need to add new radiator coolant to the system after flushing it, so be sure to have some on hand.
Flushing the antifreeze system can also be a time-consuming process. Be sure to allow yourself enough time to complete the job.
Should You Flush Your Coolant System Often?
You should flush your car’s coolant system every two years or 30,000 miles, whichever comes first. Over time, the coolant becomes less effective at transferring heat, which can lead to engine damage. The coolant also picks up dirt and debris, which can clog the system and lead to overheating.
If you do a lot of stop-and-go driving or live in a hot climate, you may need to flush your system more often.
Flushing the system removes the old coolant and any contaminants and replenishes the fluid with fresh coolant. The website dodgechryslerjeepcity.net has a great service section that will help you to ensure that your car’s engine stays cool and runs smoothly.
Flushing Coolant System Is a Simple Maintenance
It’s time to flush your car’s coolant system if you notice your car is running hotter than usual, or if the temperature gauge is reading in the red. To help your car run cooler and prevent engine damage, this simple maintenance task can help.
Our blog has countless other helpful and informative articles. Keep browsing to find more advice on performing automotive tasks.